ACS Appl Mater Interfaces 2012, 4:34–39.CrossRef 21. Park BY, Taherabadi L, Wang C, Zoval J, Madou MJ: Electrical properties and shrinkage of carbonized
photoresist films and the implications for carbon microelectromechanical systems devices in conductive GW3965 cell line media. J Electrochem Soc 2005, 152:J136-J143.CrossRef 22. Singh A, Jayaram J, Madou M, Akbar S: Pyrolysis of negative photoresists to fabricate carbon structures for microelectromechanical systems and electrochemical applications. J Electrochem Soc 2002, 149:E78-E83.CrossRef 23. Williams DB, Carter CB: Transmission electron microscopy: a textbook for materials science. New York: Springer; 2009. 24. Wang Z, Lu Z, Huang Y, Xue R, Huang X, Chen L: Characterizations of crystalline structure and electrical properties of pyrolyzed polyfurfuryl alcohol. J Appl Phys 1997, 82:5705–5710.CrossRef 25. Soukup L, Gregora I, Jastrabik L, Konakova A: Raman spectra and electrical conductivity of glassy carbon. Mater Sci Eng B 1992, 11:355–357.CrossRef 26. Sundberg P, Larsson R, Folkesson B: On the core electron binding energy of carbon and the effective charge of the carbon atom. J Electron Spectrosc Relat Phenom 1998, 46:19–29.CrossRef 27. Ranganathan S, McCreery R, Majji SM, Madou M: Photoresist-derived carbon for microelectromechanical systems
and electrochemical applications. J Electrochem Soc 2000, 147:277–282.CrossRef 28. Kuriyama K, Dresselhaus MS: Metal-insulator transition in highly disordered carbon fibers. J Mater Res 1992, 7:940–945.CrossRef 29. Im Y, Lee C, Vasquez RP, Bangar MA, QNZ Myung NV, Menke EJ, Penner RM, Yun M: Investigation of a single Pd nanowire for use as a hydrogen sensor. Small 2006, 2:356–358.CrossRef 30. Choi J, Kim J: Highly sensitive hydrogen sensor based on suspended, functionalized single tungsten
nanowire bridge. Sens Actuat B 2009, 136:92–98.CrossRef this website Competing interests The authors declare that they have no competing interests. Authors’ contributions YL carried out the fabrication and characterization of the suspended carbon structures and drafted the manuscript. JIH participated in the fabrication of the suspended carbon structures. Inositol monophosphatase 1 MM provided the scientific advice about the experiment. HS supervised the whole study. All authors read and approved the final manuscript.”
“Background Over the past decade, theoretical and experimental studies have demonstrated that a voltage is generated when carbon nanotubes (CNT) and graphene surfaces are exposed to fluid flows [1–8]. Kral and Shapiro first proposed theoretical mechanisms for flow-induced current generation within metallic single-walled carbon nanotubes (m-SWCNTs) [9]. This flow-induced voltage was then experimentally demonstrated for the first time by Sood et al., who used a SWCNT film deposited between electrodes immersed in a flowing liquid [1].