Microstructural characterization of the CFO powders was performed by transmission electron microscopy (TEM) with a JEOL 3000 F (Akishima-shi, Japan) with an accelerating voltage of 300 kV.

We used a JEOL ARM 200CF equipped with cold field emission gun and spherical aberration correctors for both scanning transmission electron microscopy (STEM) and high-resolution transmission electron microscopy GSK2399872A (HRTEM). Surface morphology, nanoparticle distribution, and film thickness of the CFO/polymer composite were evaluated by a Zeiss Supra 55VP SEM (Oberkochen, Germany). Dielectric measurements including frequency dependence of ϵ′, dielectric constant and tan δ, and dielectric loss were measured by an Agilent 4294A precision impedance analyzer. Magnetic measurements including zero field-cooled and field-cooled (ZFC/FC) low field magnetization versus temperature and room temperature hysteresis loops were carried out using a Quantum Design MPMS XL-5 SQUID magnetometer (San Diego, CA, USA), with applied fields up to 5 T and temperatures from 1.84 to 400 K. Results and discussion Highly crystalline nanocrystals with a relatively narrow size distribution and reduced tendency toward aggregation

were prepared for the purpose of generating a homogeneous 0–3 nanocomposite structure. Emphasis was on reducing the amount of surface passivation in the form of ligands, in order to optimize surface contact and therefore interaction with the ferroelectric polymer, following formation of the nanocomposite. The balance is in maintaining a highly disperse click here solvent suspension of the nanocrystals during combination with the polymer (which is aided by surface ligands) and obtaining a physical interaction between nanoparticle and polymer (hindered by long chain alkyl ligands and other typical reagents). Representative transmission electron micrograph (TEM, Figure  1a)

illustrates that the samples FK228 datasheet consist of discrete, nanosized CoFe2O4 crystals with diameter of 8 to 18 nm. The particles are mostly spherical in shape and exhibit low size distribution. Following solvent evaporation, loose and localized aggregation occurs, possibly due to weak intermolecular interactions common and/or magnetic attraction amongst the nanoparticles. Idoxuridine The chemical composition was obtained using energy-dispersive X-ray spectroscopy (EDX or EDS, Figure  1b): the ratio of the peaks is in good agreement with expected elemental composition. The average size determined by statistical analysis of the TEM images is consistent with that calculated by the Scherrer equation [18] from the XRD patterns (Figure  1c), indicating single crystallinity of the CFO nanoparticles. The position and relative intensity of all reflection peaks match well the cubic inverse spinel CoFe2O4 structure (PCPDS no. 04-006-4148), without indication of crystalline byproducts.