Supercond Sci Technol 2005, 18:334.CrossRef 14. Wee SH, Goyal A, Hsu H, Li J, Heatherly L, Kim K, Aytug T, Sathyamurthy S, Paranthaman MP: Formation of high-quality, epitaxial La 2 Zr 2 O 7 layers on biaxially textured substrates by slot-die coating of chemical solution precursors. J Am Ceram Soc 2007, 90:3529–3535.CrossRef 15. Eickemeyer J, Selbmann D, Opitz R, Boer B, Holzapfel B, Schultz L, Miller U: Nickel-refractory metal substrate tapes with high cube texture stability. Supercond
Sci Technol 2001, 14:152.CrossRef 16. Liu L, Zhao Z, Liu H, Li Y: Microstructure analysis of high-quality buffer layers on textured NiW tapes for YBCO coated conductors. IEEE Trans Appl Supercond 2010, 20:1561–1564.CrossRef 17. Xu D, Liu L, Wang Y, Zhu S, Zhu P, Li Y: Influence of CeO 2 -cap layer on the texture and critical current density of YBCO film. J Supercond Nov Magn 2012, 25:197–200.CrossRef 18. Li Y, Zhao Z, Liu L, selleck compound Ye Q, Zheng H: Fast growth processes of buffer layers for YBCO find more coated conductors on biaxially-textured Ni tapes. IEEE Trans Appl Supercond 2009, 19:3295–3298.CrossRef 19. Xu D, Wang Y, Liu L, Li Y: Dependences of microstructure and critical current density on the thickness of YBa 2 Cu 3 O 7− x film prepared by pulsed laser deposition on buffered Ni–W tape. Thin Solid Films 2013, 529:10–14.CrossRef Competing interests The authors declare that they have no competing interests. Authors’ contributions DX participated in the design
of the study, carried out the fabrication of LZO films, performed the statistical analysis,
as well as drafted the manuscript. LL participated in the design of the study, carried out the preparation of NiW tapes with different buffer architectures, and revised the manuscript. GX helped to operate the RF magnetron 4��8C sputtering system. YL participated in the design of the study, provided the theoretical and experimental guidance, and revised the manuscript. All authors read and approved the final manuscript.”
“Background A large number of experimental parameters for multi-walled carbon nanotubes (MWNTs) grown by chemical vapor deposition (CVD) have been investigated including the type of thickness of catalytic metal films [1, 2], the substrate temperature [3, 4], the ammonia gas flow rates [5, 6], and supporting substrate, etc. [7, 8]. Among those parameters, the control of the catalyst particles is one of the most important factors that determine the structure and morphology of MWNT properties such as Selleckchem Avapritinib lengths, diameters, and density [9–11]. However, a basic growth mechanism explaining the way metallic atoms interact with carbon to nucleate, grow, and heal carbon nanotubes (CNTs) still needs to be understood. Previously, we investigated the effect of the electrical conductivity of the Si(100) substrate on the control of the growth of MWNTs and found that as the electrical conductivity of the silicon substrate increased, the average diameter of the MWNTs also increased while the density of MWNTs decreased [12].